Specifications; Detector Size And Weight; Environmental Constraints - GE Definium AMX 700 Operator's Manual

Specifications

Detector Size and Weight

Table A1-2 Detector size and weight specifications
Overall detector size
• Including handle
• Not including tether
Image Size
The active area of the x-ray panel
Weight
Not including the tether or grid
Tether
The detector interfaces with the external controller via
one tether cable that contains 2 connections,
communication interface (with external controller), and
power interface (with detector power supply)

Environmental Constraints

Table A1-3 describes the environmental conditions that the detector is designed to withstand.
CAUTION: Operation or storage outside of these constraints may cause damage to the detector.
Table A1-3 Environmental Constraints
Item Operating Environment Constraints
This column contains additional
operating environmental constraints,
within which the subsystem function
and performance capabilities shall be
in compliance.
Definium AMX 700 X-Ray System
Operator Manual
Item
5161515-1EN
© 2008 General Electric Company. All rights reserved.
Chapter A1: Detector Overview
Specification
Thickness: 27mm
Width:465mm
Height:585mm
2022 x 2022 pixels or
40.4 x 40.4 cm
6 kg
The tether is at least 4.5 meters in length.
Non Operating Environment
This column defines additional Non-
operating environmental constraints,
within which the subsystem function
and performance capabilities shall be
in compliance, when returned to the
operational state, within operating
environment conditions.
Rev. 6 (10 February 2008)
Constraints
A1-11