Image Viewer
Figure A7-17 Preferences - Viewer screen
Configure Pre-set Annotations
Viewer Preferences allow you to add, edit, or remove pre-set annotations.
Follow this process to configure pre-set annotations.
1. From the Worklist screen, press [UTILITIES].
2. Select Preferences > Viewer.
3. Press Pre-set Annotation [EDIT].
The Pre-set Annotations editing screen (Figure A7-18) appears.
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A7: Set Preferences
A7-25