Image Management
Image Management preferences allow you to enable and configure the Copy Exam, Auto Tag, Auto Print,
Auto Push, and Auto Delete functions.
Figure A7-13 Preferences – Image Management
Copy Exam
Enabling the Copy Exam function allows exams to be copied between the local databases and network
hosts. It also allows exams to be copied to a CD.
There is no configuration for this function; it is either enabled (ON) or disabled (OFF).
Follow this process to enable or disable Copy Exam:
1. From the Worklist screen, press [UTILITIES].
2. Select Preferences > Image Management.
3. Press Copy Exam [ON] to enable the function.
Copy Exam [OFF] disables the function.
4. Press [CLOSE].
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A7: Set Preferences
A7-18