Table of Contents
Advertisement
Annotate and Mask Images
The Annotations/Mask panel (Figure A5-6) contains the tools to annotate images. Table A5-4 describes
the tools and their functions.
Image annotations are divided into two categories:
•
Image annotation – Lines, ellipses, Cobb angle, user annotation (notes), and RL markers added by the
operator to measure or bring attention to a section of the image. You draw or place these
annotations on the image as appropriate. Refer to
information.
•
System annotation – Information that is kept by the system, such as identifying information,
exposure and acquisition information, and processing information. These annotations are displayed
as text at the corners of the image. You may select which annotations appear, but you cannot control
where the annotations are placed.
Figure A5-6 Annotations/Mask panel
Table A5-4 Annotations/Mask tool descriptions
Tool
Line
Ellipse
Cobb
Definium AMX 700 X-Ray System
Operator Manual
Places a line on the image that you may re-size, move, or angle. Line
specifications are shown in the User Measurements annotation at the
bottom right corner of the image.
Places an ellipse (circle or oval) on the image that you may re-size, move,
or re-shape. Ellipse specifications are shown in the User Measurements
annotation at the bottom right corner of the image.
Places a Cobb angle (two lines) on the image that you may re-size, move,
or angle. Cobb angle specifications are shown in the User Measurements
annotation at the bottom right corner of the image.
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A5: Image Viewer
Add Image Annotations
Description
(p. A5-13) for more
A5-9
Advertisement
Table of Contents
