Table of Contents
Advertisement
Function
[CLOSE]
network connection status
wireless network connection
status
image database size
system status
[MESSAGE LOG]
[QAP]
Tool Panel Selection
Different tools and controls are accessed through the Tool Selection list. Press the down-arrow to see a
list of all choices.
Definium AMX 700 X-Ray System
Operator Manual
Closes the Image Viewer screen and prompts you to save any
changes to images.
Close also initiates auto print and auto push, if enabled.
Refer to
Save Changes to Images
information.
Appears when the Definium AMX 700 is connected to the
hospital network.
If the wireless network connection is enabled, displays the
status of the connection and signal strength. Refer to
Chapter A2: General Information-Wireless Network Connection
(p. A2-7) for more information.
Shows how many images are currently saved to the local
database and approximately how many more images the
database can accommodate.
Displays the last system status message.
NOTE: To clear the system status area, open the Message Log
and close it again.
Refer to
Chapter A2: General Information-System Status and
Messages
(p. A2-10) for more information.
Brings up the message log since the last system re-start.
Refer to
Chapter A2: General Information-System Status and
Messages
(p. A2-10) for more information.
When the yellow alert icon is present, indicates that QAP should
be performed to ensure continued image quality.
NOTE: QAP cannot be performed when the Image Acquisition or
Image Viewer screens are displayed. End the exam or
close the images before attempting to perform QAP.
Refer to
Chapter A8: Quality Assurance Process and
Maintenance
for more information.
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A5: Image Viewer
Description
(p. A5-27) for more
A5-4
Advertisement
Table of Contents
