Table of Contents
Advertisement
system is activated.
& Key lock-in prevention func-
tion (except vehicles with
double locking system)
This function prevents the doors from
being locked with the key still in the
ignition switch.
! Behavior with key lock-in preven-
tion function operational
With the driver's door open, the doors are
automatically kept unlocked even if the
door locking switch is pushed to the front
("LOCK") position.
! Behavior with key lock-in preven-
tion function non-operational
. If the lock lever is turned to the rear
("LOCK") position with the driver's door
open and the driver's door is then closed,
the driver's door is locked.
. If the spare key is used to lock the
driver's door from the outside of the
vehicle, the door is locked.
This function's operational/non-opera-
tional setting can be changed.
Vehicle with genuine SUBARU naviga-
tion system:
The operational/non-operational setting
can be changed using the monitor. For
details, please refer to the monitor instruc-
tion manual. The setting can also be
changed by a SUBARU dealer. We
recommend that you contact the nearest
SUBARU dealer for details.
Vehicle without genuine SUBARU navi-
gation system:
The setting can be changed by a
SUBARU dealer. We recommend that
you contact a SUBARU dealer for details.
NOTE
When leaving the vehicle, make sure
you are holding the key before locking
the doors.
Keys and doors
Keyless access with push-
button start system (if
equipped)
1)
Access key (main)
2)
Access key (sub)
3)
Key number plate
4)
Security ID plate
The keyless access with push-button start
system allows locking and unlocking of all
doors and the rear gate, unlocking of the
trunk and starting and stopping the engine
by carrying the access key. Locking and
unlocking by the remote keyless entry
system can also be controlled with the
buttons on the access key. Refer to the
"Starting & Stopping engine (vehicle with
"push-button start" system)" section in
– CONTINUED –
2-7
Advertisement
Chapters
Table of Contents
