Main Fuse; Installation Of Accessories - Subaru Legacy Outback 2008 Owner's Manual

11-58
Maintenance and service

Main fuse

The main fuses are designed to melt
during an overload to prevent damage to
the wiring harness and electrical equip-
ment. Check the main fuses if any
electrical component fails to operate (ex-
cept the starter motor) and other fuses are
good. A melted main fuse must be
replaced. Use only replacements with the
same specified rating as the melted main
fuse. If a main fuse blows after it is
replaced, we recommend that you have
the electrical system checked by your
nearest SUBARU dealer.

Installation of accessories

We recommend that you always consult
your SUBARU dealer before installing fog
lights or any other electrical equipment in
your vehicle. Such accessories may
cause the electronic system to malfunc-
tion if they are incorrectly installed or if
they are not suited for the vehicle.