Key Lock-In Prevention Function; Battery Drainage Prevention Function - Subaru Crosstrek 2020 Manual
Hide thumbs
Also See for Crosstrek 2020:
- Quick manual (52 pages) ,
- Quick reference manual (25 pages) ,
- Service bulletin (4 pages)
Table of Contents
Advertisement
2-24
Keys and doors/Door locks
warning indicator "
" will appear and
the warning chime will also sound.
& Key lock-in prevention func-
tion
Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with the front door
open.
. The key is still in the ignition switch
(models without "keyless access with
push-button start system").
. The ignition switch is in the "ACC" or
"ON" position (models with "keyless ac-
cess with push-button start system").
NOTE
. When leaving the vehicle, make sure
you are holding the key before locking
the doors.
. The factory setting (default setting)
for this function is set as "operational".
This function's operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.
! Non-operation of key lock-in pre-
vention function
When the system is set so that it does not
operate, the doors are locked by the
following operation.
. If the lock lever is turned to the front
("LOCK") position with the driver's door
open and the driver's door is then closed
with the lock lever in that position, the
driver's door is locked.
. If the spare key is used to lock the
driver's door from the outside of the
vehicle, the door is locked.
& Battery drainage prevention
function
If a door or the rear gate is not completely
closed, the interior lights will remain
illuminated as a result. However, several
lights are automatically turned off by the
battery drainage prevention function to
prevent the battery from discharging. The
following interior lights are affected by this
function.
Switch
Automatically turning
Item
position
Approximately 20
Map lights
DOOR
minutes later
Approximately 20
Dome light
DOOR
minutes later
Ignition
Approximately 20
—
switch light
minutes later
Approximately 20
Cargo area
DOOR
light
minutes later
NOTE
. The default setting for this function
is set as "operational". The operational/
non-operational setting of this function
can be changed by a SUBARU dealer.
Contact your SUBARU dealer to
change the setting.
. When leaving the vehicle, please
make sure that all doors and the rear
gate are completely closed.
. The battery drainage prevention
function does not operate while the
key is in the ignition switch.
off
Advertisement
Chapters
Table of Contents
