Information Display (If Equipped); Outside Temperature Indicator - Subaru Legacy Outback 2008 Owner's Manual

3-46
Instruments and controls
To adjust the time shown by the clock,
press the "+" button or the "−" button. The
indicated time will change in one-minute
increments. If you keep the button
pressed, the rate at which the indicated
time changes will speed up.
To reset the minutes to "00" with a radio
time signal, push the "SET" button.
CAUTION
To ensure safety, do not attempt to
set the time during driving, as an
accident from inadequate steering
operation could result.
Information display (if
equipped)
NOTE
If your vehicle is equipped with the
genuine SUBARU navigation system,
refer to the separate "Operating In-
structions for Monitor System".
With the ignition switch in the "ON"
position, each successive push of the
"DISP" button toggles the display in the
following sequence:
& Outside temperature indica-
tor
Left-hand drive and Right-hand drive ve-
hicles (Australia models)