Subaru Legacy Outback 2008 Owner's Manual page 353

and the front bumper, and use it to lever
the cover open.
3. Pull the entire front fog light cover
toward you.
4. Pull the towing hook cover toward you
to remove it.
5. Screw the towing hook into the thread
hole until its thread becomes invisible.
6. Tighten the towing hook securely by a
wheel nut wrench.
After towing, remove the towing hook from
the vehicle and stow it in the tool bag.
Fit the front fog light cover and towing
hook cover on the bumper.
! Front towing hook (2.5GT-B and
3.0R-B models)
1. Take out the towing hook, screwdriver
and wheel nut wrench from the jack
holder.
In case of emergency
2. Wrap a flat-head screwdriver in a vinyl
tape or cloth, insert it into the gap between
the cover and the front bumper, and use it
to lever the cover open.
3. Pull the entire front fog light cover
toward you.
– CONTINUED –
9-15