Subaru Legacy Outback 2008 Owner's Manual page 47

1-22
Seat, seatbelt and SRS airbags
4. After fastening the seatbelt, make sure
that the " " mark on the connector
(tongue) and the " " mark on the buckle
face outwards.
5. Insert the center seatbelt tongue plate
in the center seatbelt buckle marked
"CENTER" on the left-hand side until it
clicks.
6. To make the lap part tight, pull up on
the shoulder belt.
7. Place the lap belt as low as possible
on your hips, not on your waist.
! Unfastening the seatbelt
Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
NOTE
When the seatback is folded down for
greater cargo area, it is necessary to
disconnect the connector.