Subaru Legacy Outback 2008 Owner's Manual page 149

3-22
Instruments and controls
2. Select an item that you desire to set
with " " and " ", and press " /SET".
3. Select a value for the setting item with
" " and " ", and confirm the setting with
" /SET".
4. Repeat step 3 to enter the date and
time. When completed, select "OK", and
press " /SET".
When an anniversary is registered and the
date that was set nears, a message is
displayed when the ignition switch is
turned on.
From a week before to the day before
On the date that was set
! Clear all dates
1. Press " " or " " until "Clear all dates"
is displayed and press " /SET".
2. Select "YES" or "NO" and press " /