Table of Contents
Advertisement
& Key lock-in prevention func-
tion (except models with
double locking system)
This function prevents the doors from
being locked under the following condi-
tions.
. The key is still in the ignition switch
(models without keyless access with
push-button start system )
. The ignition switch is in the ON
position (models with keyless access with
push-button start system )
This function s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. We recommend that
you contact a SUBARU dealer for details.
NOTE
When leaving the vehicle, make sure
that you are holding the key before
locking the doors.
Keys and doors/Keyless access with push–button start system
! Behavior with key lock-in preven-
tion function operational
With the driver s door open, the doors are
automatically kept unlocked even if the
front side of the power door locking switch
is pressed.
! Behavior with key lock-in preven-
tion function non-operational
. If the lock lever is turned to the front
( LOCK ) position with the driver s door
open and the driver s door is then closed,
the driver s door is locked.
. If the spare key is used to lock the
driver s door from the outside of the
vehicle, the door is locked.
Keyless access with push-
button start system (if
equipped)
1)
Access key (main)
2)
Access key (sub)
3)
Key number plate
The vehicle has two or three access keys
and a key number plate. For details about
the key number plate, refer to
number plate F2-2.
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key.
. Locking and unlocking of the doors and
unlocking the trunk
. Starting and stopping the engine
– CONTINUED –
2-7
Key
Advertisement
Chapters
Table of Contents
