Cruise Control Indicator Light (If Equipped); Cruise Control Set Indicator Light (If Equipped); Headlight Indicator Light; Front Fog Light Indicator Light (If Equipped) - Subaru Legacy Outback 2008 Owner's Manual

the headlight flasher is operated.
&
Cruise control indica-
tor light (if equipped)
The cruise control indicator light comes on
when the ignition switch is turned to the
"ON" position and goes out after approxi-
mately 3 seconds.
This light comes on when the "CRUISE"
main switch is pressed.
NOTE
. If you move the cruise control lever
or press the main switch button while
turning the ignition switch "ON", the
cruise control function is deactivated
and the cruise control indicator light
flashes. To reactivate the cruise control
function, turn the ignition switch back
to the "Acc" or "LOCK (off)" position,
and then turn it again to the "ON"
position.
. If this indicator light and the "
indicator light flash simultaneously
during driving, we recommend that
you have the vehicle checked by your
nearest SUBARU dealer.
&
Cruise control set in-
dicator light (if
equipped)
The cruise control set indicator light
comes on when the ignition switch is
turned to the "ON" position and goes out
after approximately 3 seconds.
This light comes on when vehicle speed
has been set.
&
Headlight indicator
light
This indicator light comes on when the
light switch is turned to the "
(to turn on the parking lights) or to the
" " position (to turn on the headlights).
&
Front fog light indicator
light (if equipped)
This indicator light is on while the front fog
lights are on.
"
&
Rear fog light indicator
light (if equipped)
This indicator light is on while the rear fog
lights are on.
Instruments and controls

Clock (if equipped)

NOTE
If your vehicle is equipped with the
genuine SUBARU navigation system,
refer to the separate "Operating In-
structions for Monitor System".
" position
The clock shows the time while the
ignition switch is in the "Acc" or "ON"
position.
3-45
– CONTINUED –