Table of Contents
Advertisement
rear gate.
& License plate light (Sedan)
It may be difficult to replace the bulbs. We
recommend that you have your SUBARU
dealer replace the bulbs if necessary.
& License plate light (Station
wagon)
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens.
5. Tighten the mounting screws.
Maintenance and service
& Dome light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically. Pull the bulb
– CONTINUED –
11-67
Advertisement
Chapters
Table of Contents
