Subaru Legacy Outback 2008 Owner's Manual page 219

! Traffic information (T.I.)
When a station begins broadcasting traffic
information, this function causes the set to
automatically receive it so that the driver
can hear it. If the driver is listening to
another audio source, the set breaks into
that playback with the traffic information.
It is possible to turn the traffic information
break-in function ON/OFF by pressing the
"T.I." button briefly.
When the audio power is OFF, pressing
the "T.I." button causes the audio power to
turn ON and the traffic information break-
in function to be turned ON.
The display flashes "TA" (for "traffic
announcements") while the set is actually
receiving traffic information.
! News bulletins
When a station begins broadcasting news,
this function causes the set to automati-
cally receive it so that the driver can hear
it. If the driver is listening to another audio
source, the set breaks into that playback
with the news.
It is possible to turn the news bulletin
break-in function ON/OFF by pressing the
"NEWS" button briefly.
When the audio power is OFF, pressing
the "NEWS" button causes the audio
power to turn ON and the news bulletin
break-in function to be turned ON.
! Emergency announcements
(ALARM)
When a station begins broadcasting an
emergency announcement, the set auto-
Audio
matically receives it so that the driver can
hear it. If the driver is listening to another
audio source, the set breaks into that
playback with the emergency announce-
ment. This function is permanently ON.
! VOL ADJUST
It is possible to preset the volume that the
set will use when it breaks into playback
with broadcasts of traffic information,
news bulletins and emergency announce-
ments.
If you press the "VOL ADJ" button for at
least 2 seconds, the current volume will be
established as the preset break-in volume.
NOTE
. If the preset break-in volume is
lower than the current volume when
– CONTINUED –
5-13