Subaru Legacy Outback 2008 Owner's Manual page 102

2-14
Keys and doors
NOTE
. If any of the doors or the rear gate is
open, the doors or the rear gate cannot
be locked.
. When locking, be sure to carry the
access key to prevent locking the
access key in the vehicle.
! Disabling flashing of hazard warning
flashers
Flashing of the hazard warning flashers
when locking and unlocking can be
disabled.
When the vehicle is equipped with the
genuine SUBARU navigation system,
flashing can be disabled on the monitor
screen. For more details, refer to the
monitor instruction manual. When the
vehicle is not equipped with the genuine
SUBARU navigation system, flashing can
be disabled at SUBARU dealers. For more
details, we recommend that you contact a
SUBARU dealer.
! Interior light interlock function
When the interior light switch is in the door
interlock position, as you enter the operat-
ing range near the driver's seat or the
passenger's seat while carrying the ac-
cess key, the interior light will illuminate for
a limited time period and then turn off.
When the push-button ignition switch is
switched from "ON" to "OFF", or unlocking
is operated by the keyless access function
or remote transmitter, or the doors are
opened/closed, the interior light will illumi-
nate for a limited time period and turn off.
The interior light will turn off when any of
the following operations is performed.
. When locking is operated by pressing
one of the door lock/unlock buttons
. When the doors are locked by pressing
the " " button on the remote transmitter
. When the push-button ignition switch is
switched to "Acc".
When the vehicle is equipped with the
genuine SUBARU navigation system,
enabling/disabling of the interlock and
the time that the light stays illuminated
can be set on the monitor screen. Refer to
the monitor instruction manual for more
details. When the vehicle is not equipped
with the genuine SUBARU navigation
system, the setting can be changed at a
SUBARU dealer. For more details, we
recommend that you contact a SUBARU
dealer.
! Power saving function
The keyless access functions will be
disabled in the following cases to protect
the access key battery and the vehicle
battery.
. When the keyless access functions
and the remote keyless entry system have
not been used for 2 weeks or longer while
all doors are locked
. When the access key has been left in
the operating range for 10 minutes or
longer while all doors are locked
! Recovery from power saving mode
When one of the following is operated, the
keyless access functions will be recov-
ered.
. Unlock by pressing any of the door
lock/unlock buttons on the doors (includ-
ing rear gate).
. Lock or unlock by the remote keyless
entry system.
. Lock or unlock by the mechanical key.
! Automatic locking
If any of the doors or the rear gate was not
opened within 30 seconds after unlocking,
they will be automatically locked again.
When the vehicle is equipped with the
genuine SUBARU navigation system,
enabling/disabling of the automatic lock-
ing function and the time until automatic
locking takes place can be set on the
monitor screen. Refer to the monitor
instruction manual for more details. When
the vehicle is not equipped with the
genuine SUBARU navigation system, the
setting can be changed at SUBARU deal-