Four Stroke Splash Guards 40~F100 Splash Plates - Yamaha T8 Rigging Manual

Outboard Rigging Guide - 2001
FOUR STROKE SPLASH GUARDS
40~50, F40~F100 Splash Plates
(Spray Guards) Mounting
(Optional on 40T, 50HP, F50, F80, & F100)
The 1996 ~ newer T50 comes with an engine
splash plate mounted on the lower motor mount.
A second splash plate is included in the crate to be
mounted on the boat if needed. The boat splash
plates may be added to the 40T, 50, F/T50, F80
and F100 to reduce excessive spray.
Parts Information
Part Number Description
64J-45168-00-4D Boat Spray Guard
64J-45158-00-4D Engine Spray Guard 1
67F-45180-00-4D Engine Spray Guard 1
90201-12M01-00 Plate Washer
95380-12700-00 Nut
Installation
Spray Guards
1. Install the engine spray guard as shown in the
illustration below.
2. Torque the nuts to 43Nm (4.3 m-kg, 31 ft-lb.)
F50/T50
ENGINE
SPRAY
GUARDS
F80/F100 Engine Spray Guard
Boat Spray Guard
Qty Remarks The boat spray guard (splash plate) can reduce
spray, when the engine is mounted on a catamaran
1 All
or pontoon-type boat.
F40/4-cyl.,
F50 & T50
only
F80/F100
2
2
1. Install the plate between the boat transom and
2. Make sure the edge of the boat splash guard
3. Make sure the edge of the plate (1a) does not
2-11
Four Stroke Splash Guards
the clamp bracket (see illustration below).
is between the engine splash plate (2b) and
the engine cavitation plate (c).
touch the lower case when the motor is fully
trimmed in the down position.
40~F100 Splash Plates