Yamaha T8 Rigging Manual page 322

Outboard Rigging Guide - 2001
Neutral Switch (for 70hp model)
1. Install the neutral switch assembly 1 and
slip plate 2.
2. Install the neutral switch stay 3.
Install the stay 3 with washer and the
N O T E :
bolt.
3. Disconnect the brown lead terminals 4.
4. Disconnect the power trim/tilt switch lead
coupler 5.
5. Connect the neutral switch lead terminals 6.
WARNING
S tart in gear protection will not operate with-
out the neutral switch leads connected.
6-42
60, C60/C70/70 Tiller Handle &
Steering Friction Kit