Yamaha T8 Rigging Manual page 260

Outboard Rigging Guide - 2001
CAUTION:
If installing a water temperature sender and a
water pressure sender together on one engine:
Be sure the water pressure sender is installed
on the port side. If it is installed on the star-
board side, the sensor tube could break or
bend.
CAUTION:
After installing the temperature sender, be
sure to check for water leakage.
INSTALL
SENSOR
HERE
FOR WATER
PRESSURE
SENSOR
V4, V6, 2.6L
F25
5-23
Water Pressure/Temperature
2. Bring out the temperature sender lead wire
through the bottom cowling grommet.
Sender Installation
F40, F50, T50