Yamaha T8 Rigging Manual page 281

Outboard Rigging Guide - 2001
T9.9 REMOTE TILLER RIGGING KIT (6G8-W4831-01-00)
NOTE: This kit is intended to be used only with
the 2m (6.6 ft) cables provided.
The steering handle on the T9.9 models can be
removed from the motor and used as a remote
control unit for the throttle, shifter, and the stop
switch.
The remote tiller rigging kit provides the neces-
sary cables, hose (cable sheath), and stop switch
assembly to relocate the steering handle.
Removal
1. Remove the screw holding the CDI cover,
then remove the CDI cover.
REF
NO PART NUMBER
1
2 6G8-48311-11-00
3 6G8-48321-10-00
4 90445-20ME5-00
5 6G8-82550-10-00
6
• Component parts
2. Remove the stop switch leads (white and
black).
3. Disconnect the throttle control and shift con-
trol cables.
6-1
DESCRIPTION
Remote Tiller Rigging Kit
• Cable
• Cable
• Damper
• Stop Switch Ass'y
• Grommet
QTY.
1
1
1
1
1