Yamaha T8 Rigging Manual page 31

Outboard Rigging Guide - 2001
QUICK START DETAILS
Items listed as STD (standard) indicate that item is shipped with the engine either in the crate or in the
associated rigging kit. If the part is followed by OPT (optional) that part will need to be ordered to cor-
rectly install the package in that particular combination. Crate contents and rigging kit contents can be
found at the end of this section. Accessory items such as gauges, alarms, tiller handle conversion kits are
listed in the 2000 Outboard Parts and Accessory Catalog (LIT-10080-MR-2K), also in later chapters in
this book.
Small Model(s)
Remote Models
Rigging for Side Mount 701 Manual Control Box
Control Cables (2 req.)
1
Control Box (OPT)
(Non-electric start models / Pull to Open Throttle)
Rigging for Side Mount 703 Control Box
Control Cables 1 (2 req.)
Control Box F9.9E, T9.9E (OPT)
(Main Switch, 7 Pin Main Harness w/Safety Lanyard / Pull to Open Throttle)
or 30E
Control Box T8, F15, F15P, F25~T25 (OPT)
(Main Switch, 10 Pin Main Harness w/Safety Lanyard / Push to Open Throttle)
Optional Extension Harness 7 Pin Main Harness
(Use as needed)
Optional Extension Harness 10 Pin Main Harness
(Use as needed)
Installing Engine with 704 Single Binnacle or 705 Flush Mount Control
Control Cables (2 req)
1
Single Binnacle T9.9E, F15, 30 (OPT)
(Pull to Open Throttle / No PT&T Switch)
Single Binnacle T8, F25 (OPT)
(Push to Open Throttle / PT&T Switch)
or
Flush Mount Control T9.9E, F15, 30 (OPT)
(Push to Open Throttle ** / No PT&T Switch)
or
Flush Mount Control T8, F15P, F25 (OPT)
(Push Open Throttle / PT&T Switch / 90°)
Switch Panel Assembly F9.9, T9.9E (1 req.)
Switch Panel Assembly 9.9, 15, 30 (1 req.) No Warning
Switch Panel Assembly T8, F25~30 (1 req.) With Warning
Engine to Main Harness T9.9E (1 req.)
Engine to Main Harness F15 (1 req.)
7 Pin Main Harness T9.9E, F15 (1 req.)
Optional Extension Harness for 7 Pin Main Harness
10 Pin Main Harness F25, 30 (1 req.)
Optional Extension Harness for 10 Pin Main Harness
7 Pin to 10 Pin Adapter Harness (OPT)
1
NOTE Order control cables using part number ABA-CABLE-XX-GY substituting the correct footage needed in place of the XX.
Yamaha control cables in 1 ft. increments from 2~30 ft. and in 2 ft. increments from 32~50 ft.
** This control box can be converted from push to open throttle to pull to open throttle.
T8, 9.9, 15, F9.9, T9.9, F15, F15P, F25, T25, 30
6.6 ft. OPT.
6.6 ft. OPT.
9.9 ft. OPT.
6.6 ft. OPT.
6.6 ft. OPT.
9.9 ft. OPT.
xxii
Quick Start
ABA-CABLE-XX-GY
701-48101-51-00
ABA-CABLE-XX-GY
703-48240-12-00
703-48230-12-00
703-48207-15-00
688-82586-11-00
688-82586-11-00
688-8258A-30-00
ABA-CABLE-XX-GY
704-48230-12-00
704-48205-13-00
6X0-48203-11-00
6X0-48206-11-00
6G8-82570-02-00
689-82570-18-00
704-82570-06-00
6G8-82590-00-00
66M-82590-00-00
688-82586-50-00
688-82586-11-00
688-8258A-50-00
688-8258A-10-00
688-8258A-30-00
703-8258A-00-00