Creating Cutting Lines With Greatcut-R - Roland Camm-1 GR2-640 User Manual

Creating Cutting Data

Creating Cutting Lines with GreatCut-R

Import data into GreatCut-R and create cutting lines. For basic operations and other information on
GreatCut-R, refer to the GreatCut-R online help.
Procedure
1.
Start GreatCut-R.
2.
Display the cutting data on the GreatCut-R work screen.
• GreatCut-R format file:
Select the cutting data from [File]>[Open], and then click [Open].
• Other files:
Select the cutting data from [File]>[Import], and then click [Open].
MEMO
CorelDRAW format files cannot be imported into GreatCut-R. Open the target cutting data in CorelDRAW and
click on the menu bar.
3.
Select the object for which you want to create cutting lines.
4.
Click [Tools]>[Contour Line] or [Outline].
The [Contour Line] window or the [Outline] window appears.
MEMO
• Only [Contour Line] is available for raster data.
• For the difference between contour lines and outlines and details on these settings, refer to the Great-
Cut-R online help.
5.
Set the conditions for the cutting lines to be created.
[Maximum
gray scale]
[Accuracy]
[Contour
offset]
[Corner]
44
Preparations before Cutting Output
[Contour Line] window
To clarify the borders on which the cutting
lines are created, a higher gradation value
should be used for the object and back-
ground.
Select the accuracy level.
Enter the distance from the object.
Select how to process the corners of cut-
ting lines.
[Outline] window
[Type] Select the position of cutting lines for the
object.
[Corners] Select how to process the corners of cut-
ting lines.
[Spacing] Enter the distance from the object.
[Number of Enter the number of cutting lines created
copies] with the offset value.