Performing Cutting
• Enter 1 in [Step count]. The value entered here is the number of times of cutting in the same location
(overlap cutting).
6.
Click [Read material size] to import the size of the material loaded in the machine.
MEMO
To return the cutting carriage to the set origin after cutting is finished, set [Origin] to [Don't set].
7.
Click [Output].
The cutting data is sent to the machine and cutting starts.
MEMO
When the cutting data is too large to fit in the material to use, the following window opens. Set the method
for dividing the cutting data for cutting on the material, and then click [OK].
Select how to divide the material for the cutting data, and then set inner margins so that no gap is left in
the borders (in the X and Y directions) of the divided cutting data.
80
Basic Printing and Cutting