Roland Camm-1 GR2-640 User Manual page 88

5.
Select a color in the color palette, and then select [FlexCut] from the [Mode / Tool] list.
Set green to perforated cutting to differentiate this color from the layer colors used by other
cutting lines.
When the following screen appears, click [Yes].
6.
Click the parameter value to set the cutting conditions for the cutting data.
The blade force is not changed here because the [Die/Kiss Cut] value set from the operation
panel is applied.
7.
Click [OK].
Cutting Perforated Lines
Other Cutting
87