Table of Contents
Advertisement
(4)
Click [OK].
The cutting data and crop marks for the entered numbers specified for each direction are
duplicated.
(5)
Print all of the duplicated data to the material using your printer.
P. 71 "Printing Cutting Data on Material"
(6)
Delete the duplicated cutting data and crop marks.
(7)
Select the cutting data that includes cutting lines and crop marks, and send the cutting data to
GreatCut-R.
• Adobe Illustrator: Click [File]>[GreatCut-R]>[Cut].
• CorelDRAW: On the toolbar, click
4.
Load the material in the machine.
P. 21 "Loading the Material"
5.
Click [File]>[Cut] on GreatCut-R.
The [Output to device] window appears.
6.
Enter the number of duplications in [Copies per job], and then enter values to specify the space be-
tween cutting data sets.
For printing and cutting, enter the same values as used for the duplicate data created on the
material.
7.
Select an option for [Device], [Mode], and [Output Profile] from their pull-down lists and click [Out-
put].
Setting item
[Device]
Set the output device.
[Mode]
[Cut with AAS]/[Cut]/
[FlexCut]
[Output Profile]
[Foil]
*1
The first time you perform this action, select the [Foil] saved as default, and after saving some settings as pre-
sets, select the profile to use as reference for the material to be cut.
Setting details
*1
Cutting Multiple Sets of the Same Cutting Data
.
Notes
Select the machine model.
[Cut with AAS]: For printing and cutting
[Cut]: For cutting only
[FlexCut]: For perforated cutting
Click the parameter values to edit cutting conditions.
91
Other Cutting
Advertisement
Table of Contents
