Manually Setting The Cutting Order - Roland Camm-1 GR2-640 User Manual

Manually Setting the Cutting Order

Manually set the layer output order.
MEMO
If [Defalut] is selected from the [Mode / Tool] list in the layer cutting condition settings, the cutting order cannot be
set.
Procedure
1.
Start GreatCut-R.
2.
Display cutting data, which includes the cutting lines, on the GreatCut-R work screen.
• GreatCut-R format file:
Select the cutting data from [File]>[Open], and then click [Open].
• Other files:
Select the cutting data from [File]>[Import], and then click [Open].
MEMO
CorelDRAW format files cannot be imported into GreatCut-R. Open the target cutting data in CorelDRAW and
click on the menu bar.
3.
Click [Settings]>[Color Palette]>[Layer Order].
The [Layer Order] window appears.
4.
Select the layer you want to change the order of and click a location under [Move Layer] ( ).
MEMO
Layers are cut in the order displayed in the [Layer Order] window (top to bottom). Layers must be in ration-
al order based on cutting methods. Any layer with drawing only should be placed before a layer that includes
cutting edges.
5.
Click [OK].
The layer order is saved.
Setting Up Cutting by Layer
Using GreatCut-R
101