Remove The Material - Roland Camm-1 GR2-640 User Manual

Loading the Material

Remove the Material

Remove the material from the cutting machine.
Procedure
1.
Raise the lever.
The pinch rollers rise up to release the material.
2.
Remove the material from the front or rear side of the machine.
Separating Only the Cut Area
Procedure
1.
Press [▲] or [▼] to feed the material to the position that you want to cut.
2.
Move the safe blade along the cutting groove at the front of the cutting machine to cut off the mate-
rial.
32
Basic Settings and Operations