Table of Contents
Advertisement
(4)
Check the status of the cutting surface (part near the cutting carriage path), the material
edges, and the material on the rear side of the machine.
Incorrectly loaded material will lead to misalignment, so reload the material if:
• The surface of the material displays waviness or wrinkles.
• The roll material is fed diagonally.
• The material on the rear side of the machine is twisted.
(5)
Press [ON/OFF LINE] twice to return the material to its original position.
IMPORTANT
Remove the roll material when it is not in use.
Do not leave roll material loaded on the machine for long periods of time. Be sure to remove and store the
media when not in use. Leaving roll material loaded on the machine for a long period of time will cause the
material to sag, which can adversely affect output quality.
RELATED LINKS
・ P. 10 "Conditions for Usable Materials"
・ P. 11 "Cutting area"
・ P. 22 "Precautions for Loading Materials"
・ P. 31 "Measuring the Material Size"
Loading the Material
Basic Settings and Operations
27
Advertisement
Table of Contents
