Connecting An Omux - Avaya 8800 Series Installation Manual
Ethernet routing switch hardware components
Hide thumbs
Also See for 8800 Series:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Connecting an OMUX
Use this procedure to connect the OMUX to an SFP and to east and west backbone
interfaces.
Prerequisites
• Follow proper safety and cleaning procedures.
Warning:
Risk of personal or equipment damage
Multiplexing together several SFPs can produce a radiant power level in the fiber that
exceeds the class 1 laser limit. To avoid damage to yourself or to the equipment, take care
that you follow proper connector safety and cleaning procedures.
Procedure steps
1. Insert the SFP into the module.
2. Clean all fiber optic connectors.
3. Connect the fiber optic cables from the SFP TX and RX to the OMUX Equipment
Installation — SFP, SFP+, XFP, and OADM Hardware Components
RX and TX Equipment connectors (see the following figure and job aid).
Connecting an OMUX
August 2013
57
Advertisement
Table of Contents
