Small form factor pluggable plus transceivers
2. Determine wavelength restrictions or requirements.
3. Use the following job aid to determine the appropriate SFP+ for your application.
Job aid
SFP+ transceivers are hot-swappable input and output enhancement components that allow
10 gigabit connections.
All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision keying and low
interface losses.
The following table lists and describes the Avaya SFP+ models.
Table 3: Avaya-qualified SFP+ transceivers
SFP+ order number
AA1403011-E6
AA1403013-E6
AA1403015-E6
AA1403016-E6
AA1403017-E6
AA1403018-E6
42
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Depending on the product, you can obtain SFP+s for cable distances of up to 15
meters (m), 300 m, 10 kilometers (km), and 40 km.
10GBASE-LR
1310 nm single-mode fiber (SMF). The range is up to 10 km.
10GBASE-ER
1550 nm SMF. The range is up to 40 km.
10GBASE-SR
850 nanometers (nm). The range is up to:
• 22 m using 62.5 micrometer (µm), 160 megaHertz times km
(MHz-km) MMF
• 33 m using 62.5 µm, 200 MHz-km MMF
• 66 m using 62.5 μm, 500 MHz-km MMF
• 82 m using 50 μm, 500 MHz-km MMF
• 300 m using 50 μm, 2000 MHz-km MMF
• 400 m using OM4 MMF
10GBASE ZR/ZW SFP+
1550 nm 70km SMF
10GBASE-LRM
1310 nm. Up to 220 m reach over Fiber Distributed Data
Interface (FDDI)-grade 62.5 µm multimode fiber. Suited for
campus LANs.
10GBASE-CX
4-pair direct attach twinaxial copper cable to connect 10 Gb
ports. The length is 10 m.
Comments? infodev@avaya.com
Description
August 2013