Avaya 8800 Series Installation Manual page 48

10 Gigabit small form factor pluggable transceivers
Important:
You can configure the XFP to operate in either LAN or WAN mode, depending on the module
(8683XLR and 8612XLRS are LAN-only modules, and 8683XZR is a LAN or WAN module).
Model numbers ending in R denote a LAN interface; model numbers ending in W denote a
WAN interface.
Caution:
Risk of equipment damage
Avaya recommends that you install only one 10GBASE-ZR/ZW XFP for each module due
to cooling limitations on the 8683XLR and 8683XZR modules. Avaya further recommends
the installation of the XFP only in port 1. You can install a 10GBASE-SR, -LR/LW, or -
ER/EW in one or both of the remaining ports.
No XFP limitations exist when you use the high-speed cooling modules (released in 5.0) for
the 8010 and 8006 chassis.
Model number
10GBASE-SR
10GBASE-LRM
10GBASE-LR/LW
10GBASE-ER/EW
10GBASE-ZR/ZW
48 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Product number
AA1403005-E5 850 nanometers (nm). The range is up to
• 22 m using 62.5 micrometer (μm), 160
megaHertz times km (MHz-km) MMF
• 33 m using 62.5 μm, 200 MHz-km MMF
• 66 m using 62.5 μm, 500 MHz-km MMF
• 82 m using 50 μm, 500 MHz-km MMF
• 300 m using 50 μm, 2000 MHz-km
MMF
AA1403007-E6 1310 nm. Up to 220 m reach over Fiber
Distributed Data Interface (FDDI)-grade
62.5 μm multimode fiber. Suited for
campus LANs.
AA1403001-E5 1310 nm SMF. The range is up to 10
km.
AA1403003-E5 1550 nm SMF. The range is up to 40
km.
AA1403006-E5 1550 nm SMF. The range is up to 80
km.
Comments? infodev@avaya.com
Description
August 2013