Avaya 8800 Series Installation Manual page 86

SFP+ specifications
5 meter
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP
+. The reach for this SFP+ is up to 70 km* at a wavelength of 1550 nm. The part number of
this SFP+ is AA1403016–E6.
Caution:
Risk of BER increase
For proper SFP+ operation, ensure that at least 11 dB of attenuation is present between the
transmit and receive ports.
Table 30: 10GBASE-ZR/ZW SFP+ specifications
Line rate (nominal)
Distance
Link optical power budget
Dispersion power penalty
Transmitter characteristics
Center wavelength range
Side mode suppression ratio (minimum)
Average launch power
Optical modulation amplitude (minimum)
Average launch power of OFF transmitter
(maximum)
Extinction ratio (ER) (minimum)
RIN OMA (maximum)
12
Maximum transmitter reflectance
Receiver specifications
Wavelength range
Maximum receiver sensitivity (average
power)
Maximum receiver (average) power, BER
-12
10
86 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Cable length
Parameter
Comments? infodev@avaya.com
Part number
AA1403020-E6
Specifications
10GBASE-ZR 10.3125 Gb/s ±100 ppm (10
GbE)
Up to 70 km*
24 dB
3.0 dB at 70 km (G.652 fiber)
1530 nm to 1565 nm, nominal 1550 nm
30 dB
0 to 4.0 dBm
+1.7 dBm
-30 dBm
8.2 dB
-128 dB/Hz
-12 dB
1280 to 1575 nm. Sensitivity specified for
1530 to 1565 nm.
-24 dBm
-7.0 dBm
August 2013