Avaya 8800 Series Installation Manual page 38
Ethernet routing switch hardware components
Hide thumbs
Also See for 8800 Series:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Small form factor pluggable transceivers
4. Remove the dust cover from the optical bore and insert the fiber optic connector.
Job aid
Depending on the transceiver manufacturer, your SFP transceiver can have various types of
locking and extractor mechanisms.
The following figures shows a typical mechanisms used on SFP transceivers; other locking
and extractor mechanisms exist, although they are not shown here. In the following figure, the
SFP still has the bore plug installed. Pull the bail to release the device.
The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab to release the
device.
The following figure shows the wrap-around latch-type extraction mechanism. To remove the
device, push the collar towards the module.
38
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Comments? infodev@avaya.com
August 2013
Advertisement
Table of Contents
