Avaya 8800 Series Installation Manual page 102

Multiplexer specifications
Parameter
Passband
Directivity
Optical
In the following table, multiplexer loss values include connector loss. A 1 nm offset exists between the
stated wavelength for the CWDM SFPs and the OADMs due to a shift in the center wavelength of the
CWDM SFP as it reaches typical system operating temperature.
Table 42: CWDM OMUX specifications
Parameter
Physical Dimensions
Connectors
Cabling
Environment
Typical insertion loss
Maximum insertion loss
Sigma
Isolation
102 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Center wavelength
Wavelengths
Plug-in module size
Rack mount
Network side
Equipment side
Operating
Storage
TX to RX Network (Mux)
RX to TX Network (Demux)
TX to RX Network (Mux)
RX to TX Network (Demux)
TX to RX Network (Mux)
RX to TX Network (Demux)
Mux
Comments? infodev@avaya.com
Specification
+/- 5 nm
< -55 dB
1471 nm
1491 nm
1511 nm
1531 nm
1551 nm
1571 nm
1591 nm
1611 nm
Specification
OMUX-4
8.35 in. x 1.75 in. x
8.7 in.
1 RU
1 dual SC/PC
4 dual SC/PC
SMF, 9 µm
0 to 60C
40 to 85C
1.4 dB
2.4 dB
2.2 dB
3.2 dB
0.4 dB
0.4 dB
> 10 dB
OMUX-8
1 dual SC/PC
8 dual SC/PC
2.5 dB
3.5 dB
3.5 dB
4.5 dB
0.5 dB
0.5 dB
> 10 dB
August 2013