10Gbase-Zr/Zw Xfp Specifications - Avaya 8800 Series Installation Manual

XFP specifications

10GBASE-ZR/ZW XFP specifications

The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW XFP.
The reach is up to 80 km at a wavelength of 1550 nm. The part number of this XFP is
AA1403006-E5.
For more information about the 10GBASE-ZX XFP, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Important:
You can configure the XFP to operate in either LAN or WAN mode, depending on the module
(8683XLR and 8612XLRS are LAN-only modules, and 8683XZR is a LAN or WAN module).
Model numbers ending in R denote a LAN interface; model numbers ending in W denote a
WAN interface.
Caution:
Risk of BER increase
For proper XFP operation, ensure that at least 11 dB of attenuation is present between the
transmit and receive ports.
Table 40: 10GBASE-ZR/ZW XFP specifications
Line rate (nominal)
MTBF
Distance
Link optical power budget
Maximum transmitter and dispersion penalty 3.0 dB at 80 km (G.652 fiber)
Transmitter characteristics
Center wavelength range
Side mode suppression ratio (minimum)
Average launch power
Optical modulation amplitude (minimum)
Average launch power of OFF transmitter
(maximum)
98 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
Comments? infodev@avaya.com
Specifications
10GBASE-ZR 10.3125 Gb/s ±100 ppm (10
GbE) 10GBASE-ZW 9.95328 Gb/s ±20 ppm
(OC-192)
675 000 hours
Up to 80 km
24 dB
1530 to 1565 nm; nominal 1550 nm
30 dB
0 to 4.0 dBm
– 1.7 dBm
– 30 dBm
August 2013