10Gbase-Er/Ew Xfp Specifications - Avaya 8800 Series Installation Manual

XFP specifications
Minimum extinction ratio
RIN OMA (maximum)
12
Maximum optical return loss tolerance
Maximum transmitter reflectance
Receiver characteristics
Line rate (nominal)
Average receive power for BER 10
Maximum average receive power for
damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receiver electrical 3 dB upper cutoff
frequency
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down condition

10GBASE-ER/EW XFP specifications

The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW
XFP. The reach for this XFP is up to 40 km at a wavelength of 1550 nm. The part number of
this XFP is AA1403003-E5.
For more information about the 10GBASE-EX XFP, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
The 10GBASE-ER/EW XFP is supported by the Ethernet Routing Switch 5530 (not by the 5510
or 5520), and by the Ethernet Routing Switch 5600 Series.
Important:
You can configure the XFP to operate in either LAN or WAN mode, depending on the module
(8683XLR and 8612XLRS are LAN-only modules, and 8683XZR is a LAN or WAN module).
Model numbers ending in R denote a LAN interface; model numbers ending in W denote a
WAN interface.
96 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
-12
Comments? infodev@avaya.com
Specifications
3.5 dB
– 128 dB/Hz
-– 12 dB
– 12 dB
10GBASE-LR 10.3125 Gb/s ± 100 ppm (10
GbE) 10GBASE-LW 9.95328 Gb/s ± 100
ppm (OC-192)
– 14.4 dBm to 0.5 dBm
1.5 dBm
– 12.6 dBm
– 12 dB
– 10.3 dBm
12.3 GHz
August 2013