Connecting Ac Power - Avaya VSP 7000 Series Installing

Installation preparation
Figure 5: Connecting AC power cord to the switch
Note:
Secondary power supply is optional for redundancy and load sharing.

Connecting AC power

Perform the following procedure to connect an AC power source to the switch.
Before you begin
To connect AC power to the switch an appropriate AC power cord is required. Ensure the switch
power supply supports AC power input.
Danger:
Use only power cords with a grounding path. Without a proper ground, a person who touches
the switch is in danger of receiving an electrical shock. A switch without a proper grounding path
can result in excessive emissions.
Procedure
1. Plug the female end of the AC power cord into the back of the switch power supply.
Important:
The switch will power on immediately when it is connected to a suitable AC power
source. The switch does not have a power switch.
2. Plug the male end of the AC power cord into a suitable AC power outlet.
Installing Avaya VSP 7000 Series
22
Comments? infodev@avaya.com
August 2014