1000Base-T Sfp Specifications; 1000Base-Sx (Lc) Sfp Specifications - Avaya 8800 Series Installation Manual
Ethernet routing switch hardware components
Hide thumbs
Also See for 8800 Series:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
SFP specifications
Maximum input power
1000BASE-T SFP specifications
The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector. The 1000BASE-T is a tri-speed copper SFP that can operate at 1 gigabit per second
(1 Gb/s), 100 megabits per second (100 Mb/s), or 10 Mb/s.
This SFP supports autosensing of port speed and autonegotiation of duplex mode. However,
you can also set a fixed speed at 10 or 100 Mb/s and duplex mode to half or full.
The part number for this model is AA1419043-E6.
Important:
Avaya recommends setting all 1000BaseT ports to auto-negotiate in accordance with the
IEEE 802.3ab standard. By default, SFPs inserted into certain product-specific modules are
set for autonegotiation = True.
The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).
The following table describes the 1000BASE-T SFP specifications.
Table 7: IEEE 802.3z 1000BASE-T SFP specifications
Standards
Connectors
Cabling
Distance
1000BASE-SX (LC) SFP specifications
The 1000BASE-SX SFP provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm using
multimode optical fiber. This SFP supports full-duplex operation only. The part number for this
model is AA1419013-E5.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-
SX SFP.
64
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
-14 dBm
Specifications
IEEE 802.3z, IEEE 802.3ab
RJ-45
CAT5E or better UTP
Up to 100 m
August 2013
Advertisement
Table of Contents
