IBM 9080-M9S Manual page 689

• If you have a single node system configuration, use Figure 598 on page 683 and Table 65 on
page 683 to determine the point-to-point cabling for UPIC cables.
Figure 598. Single Node Configuration UPIC Cabling
Table 65. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 599 on page 684 and
Table 66 on page 684 to determine the point-to-point cabling for UPIC cables.
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1
System processor module 683