IBM 9080-M9S Manual page 190

• If you have a single node system configuration, use Figure 157 on page 184 and Table 20 on page
184 to determine the point-to-point cabling for UPIC cables.
Figure 157. Single Node Configuration UPIC Cabling
Table 20. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 158 on page 185 and Table
21 on page 185 to determine the point-to-point cabling for UPIC cables.
184 Power Systems: Removing and replacing parts in the 9080-M9S system
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1