IBM 9080-M9S Manual page 561

• If you have a single node system configuration, use Figure 481 on page 555 and Table 58 on
page 555 to determine the point-to-point cabling for UPIC cables.
Figure 481. Single Node Configuration UPIC Cabling
Table 58. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 482 on page 556 and
Table 59 on page 556 to determine the point-to-point cabling for UPIC cables.
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1
Processor VRM 555