IBM 9080-M9S Manual page 283

• If you have a single node system configuration, use Figure 237 on page 277 and Table 36 on page
277 to determine the point-to-point cabling for UPIC cables.
Figure 237. Single Node Configuration UPIC Cabling
Table 36. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 238 on page 278 and Table
37 on page 278 to determine the point-to-point cabling for UPIC cables.
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1
Memory VRMs 277