IBM 9080-M9S Manual page 145

• If you have a single node system configuration, use Figure 117 on page 139 and Table 13 on page
139 to determine the point-to-point cabling for UPIC cables.
Figure 117. Single Node Configuration UPIC Cabling
Table 13. Single Node Configuration UPIC Cabling
Cable number
1
2
• If you have a two, three, or four node system configuration, use Figure 118 on page 140 and Table
14 on page 140 to determine the point-to-point cabling for UPIC cables.
From
SC1: P1-C1-T1
SC1: P1-C2-T1
To
ND1: P1-C9-T1
ND1: P1-C10-T1
Memory modules 139