AGFA Jeti Tauro H3300LED Series Operator's Manual page 84

The nominal print head temperature is 45°C.
The sub tank status overview area
status for that sub tank.
Lists the sub tank general status icons
The nominal sub tank temperature is 40°C.
The Shuttle status overview also provides the Purge Colorbars button
to prepare the print heads for a manual cleaning
75)
the Print Heads). Clicking the Purge Colorbars button opens the Purge Colorbars pop up
window
(see fig.6-8)
You can select the Colorbar(s) that need purging and the duration (in seconds) of the purge sequence.
In normal conditions, the default settings are kept (such as, all Colorbars purged for 3 seconds).
During the purge process, the system applies a slight air pressure to the selected Colorbar sub tank
to push ink through the print head nozzles. The aim of this process is to unclog the print head nozzles
and prepare the print heads for a manual cleaning.
Agfa Graphics
• Print Head is ready
• Print Head is not ready
• Print Head in error
(outlined in green in Fig.6-6 on page 75)
• Sub tank is ready
• Sub tank is not ready
• Sub tank in error
• Sub tank is draining
• Sub tank is in maintenance (purge)
• Sub tank is pre filling
Revision 1.0
Jeti Tauro H3300LED Operator Manual
provides an indication of the
(outlined in yellow in Fig.6-6 on page
(see also Purging and Cleaning
Sub tank is purging
Sub tank is ready
Fig.6-8: Purge pop up window
Chapter 6
76