Startup And Shutdown; Introduction; Startup The Printer; Procedure 1: How To Perform The Daily Start-Up - AGFA Jeti Tauro H3300LED Series Operator's Manual

Introduction

This chapter contains information and procedure for starting up and shutting down the Jeti Tauro H3300
LED printer.
•

Startup the Printer

Purge and Clean
•
• Perform Nozzle Check
Selecting Own Jobs from Asanti
•
• Shut Down the Printer
Startup the Printer
The following procedure details how to locate switches and power-up the Jeti Tauro H3300 LED printer.
Procedure: How to Perform the Daily Start-up
- Step 1: Unlock all emergency stop buttons
- Step 2: Turn the main power switch on
- Step 3: Close operator covers which is secured by interlocks.
(outlined in red in Fig.4-1)
(outlined in green in Fig.4-1).
Safety Interlocks
Revision 1.0
Chapter 4

Startup and Shutdown

Fig.4-1: E-stop Button Location and Power Switch
Preparing / Ready / Printing:
Fig.4-2: Operator Cover Interlocks
Light Indicator
Power of / Error: RED
Initializing / Standby: ORANGE
GREEN
25