- Step 5: Position the media lay-on pin on the media set bar accordingly
- Step 6: Check the media sheet size
- Step 7: Click on the icon
- Step 8: Select the proper job in the queue list
button
(outlined in green in Fig. 5-19)
Agfa Graphics
(outlined in red in Fig. 5-18)
(outlined in green in Fig. 5-18)
(outlined in red in Fig. 5-19)
to drop down the set bar.
Revision 1.0
Jeti Tauro H3300LED Operator Manual
(see Fig.5-17)
Fig.5-17: Media Set Bar with Lay On Pin
in the layout pane.
to add the selected layout to the Queue.
Fig.5-18: Media Sheet Size - Manual Mode
and click the prepare print
Fig.5-19: Prepare Print Button - Manual Mode
.
Chapter 5
49