AGFA Jeti Tauro H3300LED Series Operator's Manual page 42

- Step 9: Prepare the system to load a new print task (for example, Multi Art Gloss 200grs media
1020x720mm).
- Step 10: Put the Multi Art Gloss 200grs media on the belt. Slide the sheet forward against the media
set bar and sideways against the lay-on pin.
- Step 11: Press the left foot pedal (see Fig.4-21). This turns the media belt vacuum ON.
- Step 12 Press the right foot pedal. This initiates the printing process
- Step 13 Proceed to Procedure:
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
"How to Check the Color
Revision 1.0
Nozzles".
Fig.4-19: New Print Task
Fig.4-20: Media Set Bar
Fig.4-21: Foot Pedal left
Chapter 4
34