AGFA Jeti Tauro H3300LED Series Operator's Manual page 35

- Step 7: Click on the "Re-init" button in the system screen
Important: The Jeti Tauro H3300 LED is ready to use when the status indicator is ready
(green) for all modules. The modules are only entirely green if also a configuration for the printer is
loaded. No operational mode selected, the Media Transport module will remain orange.
white in Fig.4-6)
- Step 8: Purge and wipe all heads
Important: Purging is allowed while the system is warming up
but printing is not allowed until all heads and head plates are heated.
Agfa Graphics
.
(see Procedure: "How to Perform a Purge and
Revision 1.0
Jeti Tauro H3300LED Operator Manual
(outlined in red Fig.4-6).
(icon outlined in green in Fig.4-7)
Fig.4-6: Status Indicators All Green
(outlined in
Clean).
Fig.4-7: Shuttle Status Screen
Chapter 4
27