Operator Maintenance Cabinet - AGFA Jeti Tauro H3300LED Series Operator's Manual

Operator Maintenance Cabinet

The operator maintenance cabinet is located at the output home side of the Jeti Tauro H3300 LED. It
contains the following items (see Fig. Operator Maintenace Cabinet)
01. Drip tray cover
02. Drip tray
03. Drip tray home sensors
04. Waste container ink
The waste is fitted with a maximum level sensor warning the operator when draining is needed.
Make sure that the shuttle and the drip tray are in home position before leaving the Jeti Tauro H3300
LED.
The drip tray position is up by default (2mm below maintenance height). After the heads are purged, the
drip tray is lowered. At the same time the carriage is moved up to create maximum space for cleaning
the heads.
The doors can be opened when the Re-Init button
bars pop-up screen. Access through the colorbars overview screen.
Agfa Graphics
Jeti Tauro H3300LED Operator Manual
(outlined in red in Fig.3-9)
Revision 1.0
Fig.3-8: Operator Maintenance Cabinet
is enabled in the Purge Color-
Fig.3-9: Purge Colorbars Pop-Up Screen
Chapter 3
21